SONNET
CI and EAS Audio Processor
These support guides will help you handle and care for the SONNET & SONNET EAS Audio Processor.
Pairing & Configuring the AudioStream Adapter (iOS Devices)
Download the latest version of the AudioKey app and enable Bluetooth® on your phone.
Make sure the AudioStream Adapter is turned off by removing it from your RONDO 3.
Open the AudioKey 2 app, press the menu in the upper left corner, and open Connectivity Options. Select AudioStream and then Configuration. If you have one AudioStream Adapter, select the side you wear it on. If you have an AudioStream Adapter on each side, select both left and right.
Tap “Next.” Check that RONDO 3 is on. Plug the AudioStream Adapter into RONDO 3, place it next to your phone, and press “Next”.
If it fails to configure, move RONDO 3 closer to the phone, unplug the AudioStream Adapter, plug it in again, and press “Try again”.
Repeat step 4 with your second RONDO 3, if you have one. Leave the first audio processor switched on while you do this.
Enter a username with 7 or fewer letters. Only letters from the Latin alphabet can be used. Tap “Save”.
A Bluetooth Pairing Request screen will appear. Tap “Pair”. Repeat this for your second AudioStream Adapter, if you have one. Once it has paired successfully, tap “OK”.
Exit the AudioKey 2 app and go to the settings on your iOS device. Scroll down and select “Accessibility”, then “Hearing Devices”. Tap on the section under MFI Hearing Devices. After a few seconds, it will indicate that it is connected.
The AudioStream Adapter will connect automatically whenever it is plugged in, your RONDO 3 is on, and your phone has Bluetooth enabled.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by MED-EL is under license.
Refer to your user manual for more information.
