English - International

Select your Language

Please, select a language for this page

AudioLink XT

These support guides will help you handle and care for your AudioLink XT. 

Pairing with your Audio Processor

AL XT Green Light Switch Off
1

Switch off the audio processor.

2

Press the main button for approximately 2 seconds to switch on AudioLink XT and make sure it is in standby mode. Only the status light should be active.

AL XT Telecoil and Microphone button
3

Press the telecoil and microphone buttons at the same time for approximately 2 seconds.

AL XT Pairing Mode
4

AudioLink XT is now in pairing mode for approximately 60 seconds. This is indicated by continuous double-flashing of connection symbols.

5

Place your audio processor close to AudioLink XT and switch it on. Once the audio processor has been found, the symbol on the connected side will stop blinking.

6

If you are a bilateral user, repeat step 4 with your second audio processor.

!

You can exit pairing mode at any point by pressing any button.

Book-Icon

Refer to your user manual for more information.